2012 John Deere H480C

TECHNICAL DATA
Dimensions: Width arms open 1880 mm 6.2 ft
Width arms closed 1200 mm 4.0 ft
Height without rotator and link 1350 mm 4.4 ft
Weight: Without rotator and link 1350 kg 2,976 lb
Felling/Cutting: Maximum diameter saw cut 710 mm 28.0 in
Saw bar 825 mm 32.5 in
Bar type 10 mm .404 in
Chain speed (m/s, ft/s) 40 m/s 131 ft/s
Feeding: 4WD with hydraulically driven steel feed rollers
Feed force gross
With 400/630 cc motors (4xDanfoss) 27 kN 6,070 lbf
With 500/800 cc motors (4xDanfoss) 30 kN 6,789 lbf
With 400/630 cc motors (2xDanfoss/2xPoclain) 27 kN 6,070 lbf
With 500/780 cc motors (2xDanfoss/2xPoclain) 30 kN 6,789 lbf
Speed 4.2–5.3 m/s 14–17 ft/s
Maximum feed roller opening 680 mm 26.8 in
Delimbing: Delimbing knives 4 moving and 2 fixed
Delimbing diameter tip to tip 460 mm 18.1 in
Maximum opening upper knives 680 mm 26.8 in
Maximum opening lower knives 710 mm 28.9 in
Hydraulic Requirements: Maximum operating pressure 28 MPa 4,061 psi
Recommended pump capacity 290-340 l/min 77-90 gpm
Control and Measuring System, Adaptation: Timbermatic H09